Production Operator Aberdare

Job description

We have an opportunity for a Production Operator to join our Manufacturing plant in Aberdare. We are looking for someone who is motivated, can work in a team environment and work to SOP's. Main Purpose To check and pack products being produced, ensuring correct packing materials are being used. Liaise with the charge hand when stillages are full and ready to be moved, liaise with the setter if any issues with the products or production line. Main Responsibilities Pack all product using the correct specified materials and place product correctly on to stillage. Your packing must be neat and presentable, taped up correctly and the labels are straight Change protective tapes when line is in production. Monitor and fill material hoppers on every line and assist in refilling the skin bins that you are assigned too. Assist the setters in resetting production line when either line snaps or on start up. Record scrap weight on to scrap recording sheet ensuring that scrap logged to correct production line. Ensure that the stillage on the end of your line is lined correctly to prevent product damage during transport. Pre lam product and Rockdoor product stillage lined with lay flat. If not lined see your chargehand. Do not load unlined stillage's. Lam product must be clearly marked up with shift initials and quantity. Ensure the protective film is corrective. Width, coverage, type and when applied must be free of creasing and dust from the inlinesaw also make sure the tape is being applied as neatly as possible. Ensure that all extraction units are in operation when production lines are running, keep finished products as dust free as possible, and change extraction bags when half full when possible. Lift the protective tape and check the surface quality for lines, marks or skin blemishes. Quality check all products that is produced on production line that operator is assigned too. Ensure correct count in stillage as per matrix. Report all issues to your line setter immediately. Check printers are clearly printing information on to profile if not inform the setter or manager. Product for lamination must be clearly marked up with shift initials and quantity. Occasionally the packer will be asked to cut line samples to assist the line setter with his quality checks. If a line is undergoing start up the packer must assist the line setter to pull through material. Maintain a clean, safe working area at all times Clean down the take-off table. Clean inline saw when line has completed. Clean out cross-cut saw when line has completed. Clear all scrap from walk ways and place correctly and safely on scrap stillage. Sweep floor areas. Empty rubbish bins on the lines when full. Do not leave empty drink containers on process or food wrappers. Remove any unwanted materials to correct storage areas. Clean up water or any other spillages. Assist / carry out any tasks that may be required as instructed by shift manager, setter or charge hand. Company Responsibilities – All employees throughout the business should observe the following areas of responsibility: 1. Personal Development To ensure a personal understanding of the GAP Appraisal System and its benefits and demonstrate a willingness to participate in its use, including accepting constructive feedback. To take opportunities to learn about own performance and demonstrate the GAP Values: People Customer Service Quality Innovation 2. Health & Safety To participate in the promotion of a safe working culture on site, ensuring that safety of yourself and others on site is maintained at all times by adhering to all health and safety systems as outlined in the GAP Health and Safety Policy. To ensure a safe standard of working in your work area To demonstrate safe working practices and behave in an appropriate manner at all times Ensuring that suitable and sufficient Personnel Protective Clothing is being worn correctly at all times and is relevant to the area you are working in. Be accountable for the reporting off all accident, incidents dangerous occurrences and near misses to your manager To achieve and improve upon departmental and individual health & safety objectives and KPI's. Person Specification Education and Qualification Experience in a related area, engineering or manufacturing. Work Experience Evidence of previous experience within a similar role within a manufacturing environment. Knowledge, skills and ability