QC Supervisor - Instrumentation

Job description

General Characteristics (Job Summary) Responsible for planning and controlling quality activities in given particular disciplines in accordance with quality management system established by QC Manager. Plan, control and perform inspections and tests on discipline Responsible and managing inspectors in the disciplines for which he’s Responsible. Roles and Responsibilities Prepare Quality Procedure and Inspection Test Plan. Manage work performance on particular discipline as per applicable work process. Manage actual result of Quality Performance Indicator. Co-ordinate and monitor with other discipline required to provide corrective action. Liaise and solve with clients on Quality related matters such as Quality Issue and NCR (Non-Conformance Reports), Observation. Manage work activity through system management tool (FMCS, SCMS). Submit TWLA (Two week look ahead) Schedule for inspection. Review all method of statement prepared by site engineer. Preparation of ITP as per project Specification and applied standard. Preparation of RFI (request for inspection) summary, LBE (Log Book Entry) log, INCR(Internal Non-Conformity Report) log. SA-NCR (Non-Conformity Report) log and submit to QA Manager for monthly report. Managed / attended as QC Supervisor for the external 3rd party audit on 15% and 60 % of construction completion. Develop and maintain inspection procedures and techniques, throughout the construction, precommissioning and commissioning stages. To ensure usage of accurate and calibrated tools and meters for inspection and measurements. Report on daily inspection and testing activities. Initiate Non-Conformance Reports in case of nonconformity to project quality plan/ the specification or procedural requirements are not met. Preparation and analysis of Non-Conformance Report if any, in consultation with PM. To ensure timely action of any comments/ complaints by the Contractor/ Consultants/ Client and closing of observation reports and NCRs. To initiate Corrective Action Request (CAR), Non-Conformity Report (NCR) to prevent recurrence of Non-Conformities or Violations and to verify implementation and effectiveness of Corrective Actions before Its closure. Ensure weekly/monthly QA/QC Logs are prepared/report to PM, QA/QC Manager. To respond in writing to Corrective Action Request, Non-compliance Report issued by Client. Co-ordination with Consultant/ Contractor’s QC Engineer / coordinators on all aspects of site inspections. To conduct surveillance on the inspection tests required in the technical provisions of the specification. Ensure to perform and witness testing required at sub-vendor’s premises/ approved independent testing laboratory as and when required. Ensure timely inspection of all materials/ equipment delivered and complete installations at site, coordinating with consultant’s inspectors, contractor’s coordinator, Project Engineer/Site Engineers and maintain records. To ensure that all testing and measuring instruments are calibrated as per standards/ requirement and maintaining records of calibrations. Participate QC tool box talk and training to Engineers and Supervisors. Participate in Internal quality audit and submit report to QA/QC Manager. Attend all Quality related meeting with Project Manager and Team. Documents preparation/review for Pre-commissioning procedures. Implementation of Contract Quality Plan (CQP) and Construction Quality Procedure (QPR), and Inspection and Test Plan (ITP). To identify and maintain Quality Record to demonstrate specific quality requirements and Audit Files and to include it in Monthly Quality Management Report. Lead and supervise Quality Inspectors and subcontractor’s QC Inspectors. To prepare, review and modify look-ahead schedule of all planned, critical and complex quality activities during construction and pre-commissioning phases. Maintain Monthly Quality Management Report, Construction Inspection Record Book (IRB), Material Preservation Handling and Storage Records, Project Document Control Register (PDCR) and quality documents (CQP/ITP/QPR/QSP), technical specification, IFC drawings. Education The candidate shall have a university degree and a total of seven (7) years of experience in inspection, or a high school diploma with a total of ten (10) years of experience in inspection. As minimum, the candidate shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g.; oil, gas and petrochemical projects, Infrastructure, communication). Experience Candidate shall be familiar with the international Industry Codes and Standards related to Intrinsically Safe Systems and Electrical Systems for Instrumentation such as; API RP 551 ISA RP12.6, ISA RP12.2.02, ISA TR12., ANSI MC96.1, IEEE 518, IEEE 1100, IEC 60529, NEMA ICS 6, NEMA 250, NEMA VE 1, NEMA VE 2, NFPA 70/NEC and UL 94. Experience in evaluation of Factory Acceptance Test. Working knowledge of international codes and standards related to packaged units and instrumentation such as, Distributed Control System (DCS), Supervisory Control and Data Acquisition (SCADA) Systems, Remote Terminal Unit, and Emergency Shutdown (ESD) systems. Working knowledge of telecommunications in the field of OSP (Outside Plant) installation as well as PDS (Premise Distribution System installation, and be familiar with North American or International Telecommunications Standards; Building Industry Consulting Services International - Telecommunications Distribution Methods Manual (BICSI-TDMM); National Electrical Codes; and National Electrical Safety Codes, or their equivalents. Key requirement Aramco Experience is needed. If you have SAP No. and pass the CBT, please mention it in your CV. Knowledge Technical knowledge in a particular discipline and familiar with related international codes and standards. Investigate and analyze quality issues based on related international codes and standards so that suggesting resolution. Skills enough to establish process and system to utilize FMCS and SCMS enabling systematic quality control and conduct training for its operating. Capability of quality system establishment and implementation for small scale project (below 0.5 billion dollars). Job Specific Specialty ITP Study Prevention and solving inconsistency Pre-Inspection RFI Management Punch Clear Management Punch Clear Implementation Plant Start-Up Operation Maintenance Final Handover Competencies Communication Client Management Work Proficiency Problem solving Documentation Control Technical Know-how Decision Making Reports preparation Our benefits include Accommodation Flight Tickets Medical Insurance Transportation Samsung E&A follows fair and merit-based recruitment practices. We do not charge any fees during the recruitment process. SAMSUNG E&A is a specialized EPC company that provides comprehensive solutions across all areas of the plant industry. With strong pride for our pioneering role in the history of the Korean plant industry in the past 50 years, we successfully performed numerous projects around the world and grew into a globally competitive engineering company. We continuously expand our business across the engineering industry including Oil and Gas processing, Refinery, Petrochemical, Energy Transition, Environmental, Industrial and BIO areas. Based on our extensive experience, accumulated technologies and talented resources, we provide various services from the feasibility studies to engineering, procurement, construction, commissioning and O&M. We are looking for candidates who embody creativity, commitment, and collaboration—professionals who thrive in an innovative environment, are dedicated to excellence, and excel in teamwork. Join us and be part of a dynamic team where ideas are valued, and collective success drives our future.